Back to catalog
Greenhouses

Light Deprivation

$7,999 - $22,500Configured to your operation — build yours in the 3D designer for an exact price, then add it to your cart.

Precision Light Control. Compact Footprint.

The Sun & Steel 30ft Light Deprivation Greenhouse is a purpose-built structure for growers who need full photoperiod control in a tight footprint — spanning 30 feet wide and rising to a 16-foot peak with full 8-foot standing clearance across the entire interior. Both models include a full manual blackout cover system, light-tight end wall panels, roll-up ventilation sides that seal completely for dep cycles, a single 8’6″ sliding vehicle door, insect mesh ventilation, and 6-mil UV-stabilized poly film on a galvanized steel frame.

The Standard Model features 7 arches at 5 ft on centre — straightforward to operate, easy to set up, and built for growers running consistent light dep cycles without extreme snow loads. The Heavy Model steps up to 9 arches at 3.75 ft on centre, 2.5 mm arch walls, a three-tier W-support truss on every arch, and heavier pipe diameters throughout — the same steel spec as the heavy commercial tunnels, in the most compact light dep footprint we offer.

Available builds
30' Standard Model30' Heavy Model60' Standard Model60' Heavy Model90' Standard Model90' Heavy Model

Engineered to spec

Built tough, documented down to the part.

Every Sun & Steel structure ships as a complete, labelled kit on a heavy-duty galvanized frame. Here is exactly what goes into it.

Reference specifications shown for the 30′ Light Deprivation (Standard) build — framing scales proportionally across every length below.

Key features

  • 7 gothic arches — spaced 5 ft apart — same structural profile as the High Tunnel lineup
  • 16-foot peak height with 8-foot sidewalls — maximum interior volume
  • 30-foot clear-span interior width — no interior columns
  • Full W-brace truss system — bottom cord, primary diagonal, 1st return, and 2nd return on every interior arch
  • X-bracing on both end bays — lateral wind load resistance at the gable walls
  • Sealed back wall with solid poly panel — no rear door opening for full blackout control
  • 6-mil UV-stabilized poly film — roof, front end wall, back wall, and side wall panels all included
  • Aluminum poly channel system with wiggle wire for fast, tool-free film installation and replacement
  • Galvanized steel frame throughout — ground-driven anchor system, no concrete required

Specifications

Overall Length
30 ft (approx. 9.1 m)
Width
30 ft (approx. 9.1 m)
Number of Arches
7, spaced 5 ft on centre
Peak Height
16 ft (approx. 4.9 m)
Sidewall Height
8 ft (approx. 2.4 m)
Arch Profile
Gothic curve — approx. 17.7 ft arc per half-rib
Frame Material
Galvanized steel pipe
Arch Rib Pipe
60 mm dia. | 2.0 mm wall | ~5,395 mm arc length (half-arch, 2 pcs per arch, 14 total)
Arch Column (vertical)
60 mm dia. | 2.0 mm wall | 2,438 mm (8 ft) — 14 total
Foundation Anchor Pipe
60 mm dia. | 2.0 mm wall | ~1,524 mm embedment depth (14 total)
Purlin Runs
5
Door Ends
1 (front only — back wall is sealed)
Poly Film
6-mil UV-stabilized | Roof 39.4 × 34 ft | End walls 34 × 20 ft (×2) | Side walls 34 × 12 ft (×2)

Included components 27 part types

Foundation Anchor Pipes
×14

Ground-anchor pipes driven directly into soil — no concrete required

~1,524 mm L60 mm dia.2.0 mm wall
Arch Columns (vertical)
×14

Vertical wall sections running from anchor top to arch spring — one per arch leg

2,438 mm L60 mm dia.2.0 mm wall
Arch Ribs
×14

Main structural arch members forming the gothic curve — 2 pieces per arch, joined at peak

~5,395 mm arc L60 mm dia.2.0 mm wall
Arch Connectors
×14

Junction sleeve connecting arch rib pair at peak — 2 per arch

65 mm dia.2.0 mm wall
Bottom Cord
×10

Horizontal chord at 8 ft height tying each interior arch across the full span — 2 pcs per arch (5 interior arches)

~4,572 mm L60 mm dia.2.0 mm wall
W-Support Diagonals
×10

45° diagonal braces from arch crown to bottom cord junction — 2 per interior arch

~3,450 mm L60 mm dia.2.0 mm wall
W-Support Return Pipes
×10

Primary return leg from bottom cord junction back to arch shoulder — 2 per interior arch

~1,550 mm L60 mm dia.2.0 mm wall
W-Support 2nd Return Pipes
×10

Secondary return — angled 14° outward from arch shoulder down to bottom cord — 2 per interior arch

~900 mm L60 mm dia.2.0 mm wall
Bottom Cord Splice Sleeve
×5

Internal splice joining the two bottom cord halves at mid-span

Ø50 mm2.0 mm wall
X-Brace Diagonals
×8

Cross-bracing on both end bays of both sidewalls — resists lateral wind load at the gable ends

60 mm dia.2.0 mm wall
Purlins
×10 pcs (5 runs × 2 pcs)

Longitudinal purlins running the full 30 ft — 2 mirrored shoulder runs, 2 mirrored mid runs, 1 ridge

~5,800 mm L60 mm dia.2.0 mm wall
Front End Wall Column 1 (inner)
×2
Front End Wall Column 2 (mid)
×2
Front End Wall Column 3 (outer)
×2
60 mm dia.2.0 mm wall
Back Wall Column 1
×2
Back Wall Column 2
×2
Back Wall Column 3
×2

Solid back wall infill framing — no door opening

48 mm dia.2.0 mm wall
Arch Connector Clamps
×14
Purlin Saddle Clamps
×35
Wall Pipe Saddle Clamps
×10
X-Brace Clamps
×16
Door Frame
×1

Front end wall only — 8 ft 6 in wide sliding door opening

60 mm dia.2.0 mm wall
Poly Channel (side)
×4 sticks

Aluminum channel with wiggle wire securing poly film along both sidewalls

~4,572 mm L44 mm1.5 mm wall
Roof Cover
×1

6-mil UV-stabilized poly film — full gothic arch roof with 2 ft overlap on all edges

39.4 × 34 ft6-mil UV-stabilized
Front End Wall Poly Panel
×1

6-mil UV-stabilized poly film for the door end gable with 2 ft overlap on all edges

34 × 20 ft6-mil UV-stabilized
Back Wall Poly Panel
×1

6-mil UV-stabilized poly film for the sealed back wall with 2 ft overlap on all edges

34 × 20 ft6-mil UV-stabilized
Side Wall Poly Panels
×2

6-mil UV-stabilized poly film for both sidewalls with 2 ft overlap on all edges

34 × 12 ft6-mil UV-stabilized